Home and yard material calculator
Cubic yard calculator
Enter the length, width and depth to get the volume in cubic yards, cubic feet and cubic metres.
- Every figure from a published source
- Formula shown with each result
- No tracking, no account
Your volume
- Cubic yardscu yd
- Cubic feetcu ft
- Cubic metresm³
What is this for?
Open a calculator with the same sizes to get tons, bags and cost.
- Gravel opens with crushed gravel at 2,700 lb per cu yd (S1): the tons change with the material you pick there.
- Concrete opens with 0 % extra so the volume matches; a direct visit pre-fills 4 %, and the ready-mix trade association advises 4 to 10 % extra (S4).
Estimate only: a planning figure, not an engineering calculation.
A material calculator for each job
- Gravel calculatorDriveways, paths and bases: cubic yards, tons and bags.Open calculator →
- Mulch calculatorBeds and tree rings: bulk or 1.25 and 2 cu ft bags.Open calculator →
- Concrete calculatorSlabs, footings, columns and steps: ready-mix or bags.Open calculator →
- Drywall calculatorRooms or walls: sheets, tape, compound and screws.Open calculator →
How this yard calculator works
- Volume in cubic feet = length × width × depth, with every size in feet. Depth in inches is divided by 12 first.
- Cubic yards = cubic feet ÷ 27, because a yard is exactly 3 ft (S8).
- Cubic metres come from the same volume with 1 ft = 0.3048 m exactly (S8). Metric sizes are converted to feet the same way before the volume is worked out.
No extra is added for waste or settling. The gravel calculator, mulch calculator and concrete calculator let you add it, and the drywall calculator works in sheets instead of cubic yards.
Cubic yard questions
- How do you calculate cubic yards?
- Multiply the length by the width by the depth, all in feet, to get cubic feet, then divide by 27, because a cubic yard is 3 ft × 3 ft × 3 ft (S8). Depth is usually measured in inches, so divide it by 12 first. Example: a bed 10 ft by 10 ft and 3 in deep is 10 × 10 × 0.25 = 25 cu ft, and 25 ÷ 27 is about 0.93 cu yd.
- Is a cubic yard 3 ft by 3 ft?
- A cubic yard is 3 ft by 3 ft by 3 ft: 27 cubic feet, or about 0.76 cubic metres (S8). A patch 3 ft by 3 ft with no depth is a square yard, which measures area, not volume.
- How much area does 1 cubic yard cover?
- It depends on the depth. One cubic yard is 27 cubic feet (S8), so the area it covers in square feet is 27 divided by the depth in feet. At 3 in deep it covers 108 sq ft, for example a bed 12 ft by 9 ft; at 2 in deep it covers 162 sq ft, for example 18 ft by 9 ft.
- Can I convert cubic yards to square yards?
- Only if you know the depth, because cubic yards measure volume and square yards measure area. Square yards = cubic yards ÷ depth in yards. A square yard is 9 sq ft (3 ft × 3 ft, S8), so the 108 sq ft that 1 cubic yard covers at 3 in deep is 12 square yards, for example 4 yd by 3 yd.
- How many bags make a cubic yard?
- Divide 27 cubic feet by the volume of one bag and round up. For the bag sizes this site has sources for: 14 bags of 2 cu ft mulch or 22 bags of 1.25 cu ft (S9), and 90 bags of 40 lb concrete mix, which yields about 0.30 cu ft a bag (S3). Bags of soil and other materials vary, so use the volume printed on the bag.
- How do I convert cubic yards to tons?
- Multiply the cubic yards by the material's weight per cubic yard and divide by 2,000 lb per US ton (S8). Loose crushed gravel weighs 2,700 lb per cubic yard (S1), so 1 cubic yard is 1.35 US tons. Weights differ by material, so use your supplier's figure if you have one.
Sources
- S1: California Department of Transportation (Caltrans), Maintenance Manual Vol. 1, Appendix "Useful Information", July 2014, page Appen-31 (broken stone and sand, loose measure).
- S3: Manufacturer technical data sheet for a packaged concrete mix meeting ASTM C387, revised October 2022: yield per bag for 40, 50, 60, 80 and 90 lb bags. Full reference in the site's source list (SOURCES.md).
- S4: National Ready Mixed Concrete Association, Concrete in Practice 8, "Discrepancies in Yield" (2016 edition): "an allowance of 4 to 10 percent over plan dimensions for waste, over-excavation and other contingencies".
- S8: National Institute of Standards and Technology, Guide to the SI (SP 811), Appendix B.8: 1 ft = 0.3048 m, 1 yd = 0.9144 m, 1 short ton = 2,000 lb.
- S9: Mississippi State University Extension, "Mulch How-To for the Landscape" (Extension for Real Life blog): "Bagged mulch is also available in amounts such as 1.25 cubic feet or 2.0 cubic feet."
The worked numbers in the answers above were produced by the same calculation code the calculators use.
Sources you can check
Densities, bag yields and coverage come from state highway agencies, a university extension service, a trade association, a building-trade guide, manufacturer data sheets and NIST conversion factors. Each calculator lists them; all were last reviewed on 2026-11-14.
The working is shown
Every result says what it assumes and how it was worked out, step by step, so you can check it or hand it to your supplier.
An estimate, stated plainly
Results are planning figures, not engineering calculations. Check local codes and your supplier's figures before you order.