Calculate First

Calculator

Mulch calculator

How much mulch to buy for your beds, in bulk or in bags.

Estimate onlySources reviewed 2026-11-14See the sources

Units

Beds to cover

More options: waste, bag size, prices

What this calculator is for

This mulch calculator works out how much mulch to spread on flower beds, borders and tree rings. You get the volume in bulk and the number of bags for the common bag sizes, and which choice needs the fewest bags or costs least with your prices.

How to measure

  1. Measure each bed. Rectangle: length and width. Round bed or tree ring: straight across the middle. Triangle: a base and the height to the opposite corner.
  2. For an odd-shaped bed, split it into these shapes and add one area row for each.
  3. Choose the depth for your mulch type: press the ? next to Depth for the extension service's table.
  4. Read the volume printed on the bag before you buy: bag sizes vary.
Rectangle: length and width
Circle: diameter
Triangle: base and height

The formula

Worked example

The example "Tree ring, 6 ft across" in the start panel: a ring 6 ft across, 3 in deep. Both sizes have a source (shown with the example).

  1. Area = π × 6² ÷ 4 = 28.27 sq ft.
  2. Depth 3 in ÷ 12 = 0.25 ft. Volume = 28.27 × 0.25 = 7.07 cu ft = 0.26 cu yd (÷ 27).
  3. 2 cu ft bags: 7.07 ÷ 2 = 3.53, rounded up to 4 bags.
  4. 1.25 cu ft bags: 7.07 ÷ 1.25 = 5.65, rounded up to 6 bags.
  5. No waste added. Enter bag or bulk prices under More options to see the costs.

Questions

How deep should mulch be?
The extension service gives 2 to 3 in for pine or hardwood bark and compost, 1 to 2 in for grass clippings, and other rates by type (S7). See the reference table below.
Which bag size should I buy?
The result names the size that needs the fewest bags. If you type bag and bulk prices under More options, it also names the cheapest choice with your prices.
Why round up the bags?
Shops sell whole bags, so every bag count is rounded up. The volume itself is not rounded.
Should I add extra for waste?
Our sources give no figure for mulch. Nothing is added unless you enter your own percentage.
My bags are a different size. Can I use it?
Yes. Enter the size printed on the bag under More options; the calculator adds it to the results.

Reference: how deep to spread mulch

Scroll the table sideways for more →

Application rates from Mississippi State University Extension (S7). Centimetres converted with 1 in = 2.54 cm (S8).
MulchInchesCentimetres
Pine or hardwood bark2 to 35.08 to 7.62
Cypress bark2 to 35.08 to 7.62
Cocoa-bean hulls3 to 47.62 to 10.16
Compost2 to 35.08 to 7.62
Grass clippings1 to 22.54 to 5.08
Shredded leaves2 to 35.08 to 7.62
Whole leaves615.24
Gravel, pebbles, stones12.54

Sources

  1. S7: Mississippi State University Extension, Publication 2301, "Mulches for the Landscape", Table 1 (application rate).
  2. S9: Mississippi State University Extension, "Mulch How-To for the Landscape" (Extension for Real Life blog): "Bagged mulch is also available in amounts such as 1.25 cubic feet or 2.0 cubic feet."
  3. S8: National Institute of Standards and Technology, Guide to the SI (SP 811), Appendix B.8: 1 ft = 0.3048 m, 1 in = 2.54 cm, 1 lb = 0.45359237 kg, 1 US gal = 3.785411784 L, 1 short ton = 2,000 lb.

Every figure on this page comes from these sources. Where a source gives a range, the calculator shows the range and lets you change the value.

Related

Back to the calculator